Raised out of the question around resolution and grain. During the research residency at the Frans Masereel Centre I found a pile of rejected litho-stones. I selected a few and used the laser-cutting machine to engrave them. For this is used the image know from broadcast through the ether. The resolution of the laser-cutter can be set quite high, only then the details of the engraving in the litho-stone will be blown away. After doing some tests the best resolution to use was the resolution of old televisions which is 72DPI.
produced at the Frans Masereel Centre (Kasterlee, Be)
size: 40cm x 30cm x 4cm
object